Five technical improvements to improve the quality of the integrated precast pump station

Integrated precast pump station is a kind of buried rainwater, sewage collection equipment, due to its own nature of work, liquid, soil will be corrosive to the pump station, and the pump station is in long-term operation, most of them are in 24 hours of operation, once the pump station internal parts damaged, it needs staff into the cylinder body for maintenance, The situation is serious and needs to be replaced, which will consume a lot of manpower and material resources and require time limit. It is a more troublesome thing, so the integrated precast pump station has greater requirements on quality. The following Denor Xiaobian to say, in the quality of the pump station is how we improve?

Denol is a manufacturer with many years of production experience. In the parts of the pump station, the pump cylinder, water pump, motor, remote monitoring system are all produced by the company, and adopt joint venture or imported components. Integrated pump station to lift sewage, rainwater, drinking water, waste water lifting equipment, by the factory unified production and assembly to the site installation of the pressure pump station. The integrated precast pump station is installed on the specified foundation or facility according to the construction and assembly drawings and related installation technical standards. The process of leveling and stabilizing, mechanical assembly and equipment connection, electrical wiring and test, value adjustment and test, local and centralized control simulation test is completed, so that the integrated precast pump station can meet the conditions for trial operation.

On the cylinder of the integrated precast pump station, the glass steel cylinder of the precast pump station has the test report issued by the glass steel testing center. The hardness of the cylinder is more than 60Hba, the circumferential compression strength is more than 400MPa, the circumferential tensile strength is more than 650MPa, and the axial compression strength is more than 150MPa. The axial tensile strength is more than 100MPa, and the circumferential bending strength is more than 550MPa.

Since the integrated precast pump station is a sewage pump station, and the pump is the heart of the whole pump station, we attach great importance to the quality of the sewage pump. In order to improve the service life of the pump in the precast pump station and facilitate the operation of the pump station, the sewage pump of the integrated precast pump station is self-produced by the company, which meets the international requirements and has been strictly tested.

At the same time, sewage discharge is also a key point is the capacity of sewage discharge and anti-siltation, the integrated precast pump station in the base using the principle of physics, as well as the use of automatic cleaning and other functions, so that the pump station anti-siltation, blocking function greatly improved, but also improve the quality of the pump station. In order to improve the reliability and security of pump station control, our control cabinet computer software system has successfully applied for copyright.

The above five points are the five major technological improvements in continuous development, which have greatly improved the quality of the integrated precast pump station, and also witnessed the progress and development of the pump station industry. In the continuous breakthrough to improve the product, will provide better products to customers, and constantly improve the competitiveness of products. With excellent production technology, product quality and good service, the products are sold all over the country and overseas. Purchase integrated precast pump station, choose Denore!