Stainless steel corrugated non-tensile water tank is made of patented corrugated plate, through tungsten argon arc welding, type plate specifications can be arbitrary design according to the size of the tank, corrugated design vertical compressive performance is strong, no internal tension, type plate specifications size, the same size tank using less modulus, reduce the number of welds, reduce the risk of leakage, at the same time more beautiful overall appearance. Stainless steel corrugated plate whether the production of finished water tank or lined water tank has good performance.

Product features:

1, the use of patent corrugated plate, can be any height combination, the overall molding of the side plate, no "cross" word cross weld, the same size tank using less modulus, reduce the weld to reduce the risk of leakage, and the overall appearance of beautiful.

2, the overall corrugated design, the vertical pressure of the tank is stronger, not easy to produce deformation.

3, the whole water tank adopts the frame structure, the pressure strength is greater, the internal no tension, convenient artificial cleaning water tank.

4, the size of the box is not limited by the geometric module, can be made into any size of water tank according to user requirements.

5, the use of high quality food grade stainless steel SUS304, SUS444, SUS316L material made of health and safety, water tank health indicators are in line with the national and industry standards, through the health inspection and quarantine.

6, the products are widely used in construction, fire, medicine, food, chemical, boiler system and other industries.

Schematic diagram:

1, the actual size of the water tank can be determined according to the user's requirements and site space, site installation combination.

2. The water tank equipment and surrounding space should be kept above 500mm for easy installation and maintenance.

3. The water inlet pressure of the user should be determined between 0.1-0.6MPa.

4. The concrete foundation of the water tank should be between 300-500mm and kept flat, with the horizontal error within ±3mm.